No other part of your house is worn out like your garage door. You never pay attention to how often you use the garage door until the day it breaks.
Garage can really make life easier, but if left untreated, it can pose a safety risk for you, your family, and especially your children. Due to natural wear, the garage door cable can be torn or the door opener can be damaged, endangering your belongings and everyone near your door.
To maintain it properly, it is important to carry out routine maintenance to avoid expensive repairs. The following 10 tips on maintaining a garage door for homeowners will help you keep your door functioning properly for years to come. These treatment tips do not require special knowledge and usually last less than 10 minutes.
Never unplug the lifter to ensure safety when working in your garage. The garage cable is under extreme pressure and is cut like a knife when removed.
Never try to adjust or loosen the garage door springs. This is a task that should only be left to experts.
When was the last time you inspected your garage door visually? You may not be a certified technician, but you can take the time to check your garage.
If you have a metal garage, check for rust stains. These areas must be sanded, prepared and painted. If you have a wooden garage door, it must be checked for water damage. If the wooden garage is not sealed properly, it can bend and lose its shape over time.
Also good for washing your door regularly with universal cleaners. Your garage door is a big part of the exterior of your home. So if you keep it clean and neat, it will have a positive effect on the appearance of your home.
Watch and hear your door while working
Take the time to monitor and listen to your garage every time you use it. This is the best preventive measure any homeowner can do. This way you can see when something is wrong or when something is out of place.
Check your cable visually
You may not touch the cable. This high-voltage cable is responsible for lifting the door. You have enough strength to cause serious injury, even death. You can also visually inspect the garage cable for broken or incorrect threads. If you find damage, we suggest you hire a specialist.
Check the garage door tracks
Pay attention to the rails on both sides of the door. Clean the garage door rails so that there are no deposits or deposits. Also pay attention to physical damage and make sure it is straight and parallel. Damaged lines can cause the door to become smooth and become very loud. Spray the garage lane with orange-based solvents or WD-40 and wipe with a cloth. If necessary, use a used toothbrush to remove dirt, then wipe with a towel.
Any major repairs or adjustments to the track must be carried out by a professional garage door repair Torrance technician.
Apply oil to the moving parts
Ten minutes of work can extend the life of your garage door for years. If you keep the door parts lubricated, your garage will remain smooth and calm. You must use white lithium grease on the chain to open your garage, and oil on rollers, hinges, bearings and rails. Also apply lubricant to the garage door opener chain or drive screw.
Remember to never work on springs or cables. Leave this to professionals.
Check all bolts and screws on your door
Check the roller and screw holders and tighten with (socket wrench). Garages open and close on average more than a thousand times a year. Easy to loosen hardware, screws and bolts with all movements and vibrations.